⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Beckham County

Beckham County, Oklahoma: well depth, water level & drilling cost

✓ 2,548 OWRB records · verified 2026-10-02

100 ftmedian well depth
75 ft–140 fttypical depth range
31 ftmedian static water level
20 gpmmedian yield (2,284 tests)

Pull every recorded well near a Beckham County address — $49

How deep are wells in Beckham County, Oklahoma?

The median drilled well depth in Beckham County is 100 ft, based on 2,474 wells with recorded depths in the state OWRB database. Half of all wells fall between 75 ft and 140 ft; 90% are shallower than 183 ft. Wells drilled since 2016 have a median depth of 98 ft.

How much does it cost to drill a well in Beckham County?

Applying published per-foot rates to the local median depth of 98 ft: drilling and casing alone typically runs $2,450–$6,370; a complete system including pump, pressure tank, and hookup typically runs $5,880–$9,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Beckham County?

The median static water level is 31 ft below ground surface (middle half of wells: 17 ft–50 ft), from 2,204 measurements.

How much water do wells in Beckham County produce?

The median tested yield is 20 gpm (middle half: 10 gpm–80 gpm), from 2,284 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 238 50–100 ft 892 100–150 ft 849 150–200 ft 293 200–300 ft 123 300–400 ft 22 400–600 ft 53 600+ ft 4
Looking at a specific property in Beckham County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Beckham County

Free. Goes to licensed drillers working Beckham County.

Well records by ZIP code in Beckham County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.