⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Blaine County

Blaine County, Oklahoma: well depth, water level & drilling cost

✓ 1,861 OWRB records · verified 2026-10-02

68 ftmedian well depth
49 ft–120 fttypical depth range
28 ftmedian static water level
30 gpmmedian yield (1,505 tests)

Pull every recorded well near a Blaine County address — $49

How deep are wells in Blaine County, Oklahoma?

The median drilled well depth in Blaine County is 68 ft, based on 1,820 wells with recorded depths in the state OWRB database. Half of all wells fall between 49 ft and 120 ft; 90% are shallower than 230 ft. Wells drilled since 2016 have a median depth of 71 ft.

How much does it cost to drill a well in Blaine County?

Applying published per-foot rates to the local median depth of 71 ft: drilling and casing alone typically runs $1,775–$4,615; a complete system including pump, pressure tank, and hookup typically runs $4,260–$7,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Blaine County?

The median static water level is 28 ft below ground surface (middle half of wells: 15 ft–52 ft), from 1,292 measurements.

How much water do wells in Blaine County produce?

The median tested yield is 30 gpm (middle half: 12 gpm–90 gpm), from 1,505 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 457 50–100 ft 763 100–150 ft 228 150–200 ft 105 200–300 ft 209 300–400 ft 57 400–600 ft 0 600+ ft 1
Looking at a specific property in Blaine County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Blaine County

Free. Goes to licensed drillers working Blaine County.

Well records by ZIP code in Blaine County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.