⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Cherokee County

Cherokee County, Oklahoma: well depth, water level & drilling cost

✓ 2,394 OWRB records · verified 2026-10-02

220 ftmedian well depth
140 ft–395 fttypical depth range
90 ftmedian static water level
5 gpmmedian yield (1,999 tests)

Pull every recorded well near a Cherokee County address — $49

How deep are wells in Cherokee County, Oklahoma?

The median drilled well depth in Cherokee County is 220 ft, based on 2,381 wells with recorded depths in the state OWRB database. Half of all wells fall between 140 ft and 395 ft; 90% are shallower than 480 ft. Wells drilled since 2016 have a median depth of 300 ft.

How much does it cost to drill a well in Cherokee County?

Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Cherokee County?

The median static water level is 90 ft below ground surface (middle half of wells: 55 ft–160 ft), from 1,129 measurements.

How much water do wells in Cherokee County produce?

The median tested yield is 5 gpm (middle half: 2 gpm–10 gpm), from 1,999 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 15 50–100 ft 161 100–150 ft 495 150–200 ft 302 200–300 ft 426 300–400 ft 389 400–600 ft 526 600+ ft 67
Looking at a specific property in Cherokee County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Cherokee County

Free. Goes to licensed drillers working Cherokee County.

Well records by ZIP code in Cherokee County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.