⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Kingfisher County

Kingfisher County, Oklahoma: well depth, water level & drilling cost

✓ 2,305 OWRB records · verified 2026-10-02

62 ftmedian well depth
50 ft–81 fttypical depth range
19 ftmedian static water level
30 gpmmedian yield (2,002 tests)

Pull every recorded well near a Kingfisher County address — $49

How deep are wells in Kingfisher County, Oklahoma?

The median drilled well depth in Kingfisher County is 62 ft, based on 2,230 wells with recorded depths in the state OWRB database. Half of all wells fall between 50 ft and 81 ft; 90% are shallower than 100 ft. Wells drilled since 2016 have a median depth of 67 ft.

How much does it cost to drill a well in Kingfisher County?

Applying published per-foot rates to the local median depth of 67 ft: drilling and casing alone typically runs $1,675–$4,355; a complete system including pump, pressure tank, and hookup typically runs $4,020–$6,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Kingfisher County?

The median static water level is 19 ft below ground surface (middle half of wells: 12 ft–30 ft), from 1,650 measurements.

How much water do wells in Kingfisher County produce?

The median tested yield is 30 gpm (middle half: 12 gpm–100 gpm), from 2,002 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 553 50–100 ft 1,333 100–150 ft 288 150–200 ft 37 200–300 ft 15 300–400 ft 2 400–600 ft 1 600+ ft 1
Looking at a specific property in Kingfisher County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Kingfisher County

Free. Goes to licensed drillers working Kingfisher County.

Well records by ZIP code in Kingfisher County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.