Oklahoma Well Data › Latimer County
Latimer County, Oklahoma: well depth, water level & drilling cost
✓ 217 OWRB records · verified 2026-10-02
Pull every recorded well near a Latimer County address — $49
How deep are wells in Latimer County, Oklahoma?
The median drilled well depth in Latimer County is 160 ft, based on 209 wells with recorded depths in the state OWRB database. Half of all wells fall between 120 ft and 240 ft; 90% are shallower than 300 ft. Wells drilled since 2016 have a median depth of 180 ft.
How much does it cost to drill a well in Latimer County?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Latimer County?
The median static water level is 60 ft below ground surface (middle half of wells: 37 ft–81 ft), from 174 measurements.
How much water do wells in Latimer County produce?
The median tested yield is 4 gpm (middle half: 2 gpm–8 gpm), from 182 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Latimer County.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.