⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Logan County

Logan County, Oklahoma: well depth, water level & drilling cost

✓ 4,950 OWRB records · verified 2026-10-02

180 ftmedian well depth
150 ft–220 fttypical depth range
80 ftmedian static water level
20 gpmmedian yield (4,732 tests)

Pull every recorded well near a Logan County address — $49

How deep are wells in Logan County, Oklahoma?

The median drilled well depth in Logan County is 180 ft, based on 4,902 wells with recorded depths in the state OWRB database. Half of all wells fall between 150 ft and 220 ft; 90% are shallower than 260 ft. Wells drilled since 2016 have a median depth of 200 ft.

How much does it cost to drill a well in Logan County?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Logan County?

The median static water level is 80 ft below ground surface (middle half of wells: 58 ft–120 ft), from 4,543 measurements.

How much water do wells in Logan County produce?

The median tested yield is 20 gpm (middle half: 15 gpm–30 gpm), from 4,732 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 76 50–100 ft 272 100–150 ft 781 150–200 ft 1,550 200–300 ft 1,977 300–400 ft 230 400–600 ft 16 600+ ft 0
Looking at a specific property in Logan County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Logan County

Free. Goes to licensed drillers working Logan County.

Well records by ZIP code in Logan County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.