⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Pittsburg County

Pittsburg County, Oklahoma: well depth, water level & drilling cost

✓ 696 OWRB records · verified 2026-10-02

140 ftmedian well depth
100 ft–200 fttypical depth range
42 ftmedian static water level
4 gpmmedian yield (592 tests)

Pull every recorded well near a Pittsburg County address — $49

How deep are wells in Pittsburg County, Oklahoma?

The median drilled well depth in Pittsburg County is 140 ft, based on 671 wells with recorded depths in the state OWRB database. Half of all wells fall between 100 ft and 200 ft; 90% are shallower than 300 ft. Wells drilled since 2016 have a median depth of 180 ft.

How much does it cost to drill a well in Pittsburg County?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Pittsburg County?

The median static water level is 42 ft below ground surface (middle half of wells: 30 ft–73 ft), from 571 measurements.

How much water do wells in Pittsburg County produce?

The median tested yield is 4 gpm (middle half: 2 gpm–10 gpm), from 592 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 30 50–100 ft 94 100–150 ft 236 150–200 ft 85 200–300 ft 155 300–400 ft 59 400–600 ft 11 600+ ft 1
Looking at a specific property in Pittsburg County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Pittsburg County

Free. Goes to licensed drillers working Pittsburg County.

Well records by ZIP code in Pittsburg County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.