Oklahoma Well Data › Oklahoma County › Edmond (73012)
Edmond, OK (73012): well depth, water level & drilling cost
✓ 554 OWRB records · Oklahoma County
Pull every recorded well near a Edmond (73012) address — $49
How deep are wells in and around Edmond (73012), Oklahoma?
The median drilled well depth in and around Edmond (73012) is 240 ft, based on 527 wells with recorded depths in the state OWRB database. Half fall between 200 ft and 300 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in and around Edmond (73012)?
Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Edmond (73012)?
The median static water level is 103 ft below ground surface (middle half of wells: 80 ft–160 ft), from 479 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Oklahoma County.
Part of Oklahoma County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.