Oklahoma Well Data › Garvin County › Pauls Valley (73075)
Pauls Valley, OK (73075): well depth, water level & drilling cost
✓ 124 OWRB records · Garvin County
Pull every recorded well near a Pauls Valley (73075) address — $49
How deep are wells in and around Pauls Valley (73075), Oklahoma?
The median drilled well depth in and around Pauls Valley (73075) is 80 ft, based on 117 wells with recorded depths in the state OWRB database. Half fall between 60 ft and 108 ft; 90% are shallower than 187 ft.
How much does it cost to drill a well in and around Pauls Valley (73075)?
Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Pauls Valley (73075)?
The median static water level is 25 ft below ground surface (middle half of wells: 18 ft–41 ft), from 82 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Garvin County.
Part of Garvin County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.