Oklahoma Well Data › Garvin County › Hennepin (73444)
Hennepin, OK (73444): well depth, water level & drilling cost
✓ 72 OWRB records · Garvin County
Pull every recorded well near a Hennepin (73444) address — $49
How deep are wells in and around Hennepin (73444), Oklahoma?
The median drilled well depth in and around Hennepin (73444) is 148 ft, based on 64 wells with recorded depths in the state OWRB database. Half fall between 115 ft and 191 ft; 90% are shallower than 267 ft.
How much does it cost to drill a well in and around Hennepin (73444)?
Applying published per-foot rates to the local median depth of 148 ft: drilling and casing alone typically runs $3,700–$9,620; a complete system including pump, pressure tank, and hookup typically runs $8,880–$14,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Hennepin (73444)?
The median static water level is 64 ft below ground surface (middle half of wells: 26 ft–118 ft), from 40 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Garvin County.
Part of Garvin County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.