⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Jackson County › Duke (73532)

Duke, OK (73532): well depth, water level & drilling cost

✓ 312 OWRB records · Jackson County

99 ftmedian well depth
80 ft–120 fttypical depth range
45 ftmedian static water level
800 gpmmedian yield (217 tests)

Pull every recorded well near a Duke (73532) address — $49

How deep are wells in and around Duke (73532), Oklahoma?

The median drilled well depth in and around Duke (73532) is 99 ft, based on 300 wells with recorded depths in the state OWRB database. Half fall between 80 ft and 120 ft; 90% are shallower than 150 ft.

How much does it cost to drill a well in and around Duke (73532)?

Applying published per-foot rates to the local median depth of 99 ft: drilling and casing alone typically runs $2,475–$6,435; a complete system including pump, pressure tank, and hookup typically runs $5,940–$9,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Duke (73532)?

The median static water level is 45 ft below ground surface (middle half of wells: 32 ft–65 ft), from 193 measurements.

Drilled depth distribution

0–50 ft 26 50–100 ft 126 100–150 ft 115 150–200 ft 26 200–300 ft 5 300–400 ft 1 400–600 ft 0 600+ ft 1
Looking at a specific property in Duke (73532)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Duke (73532)

Free. Goes to licensed drillers working Jackson County.

Part of Jackson County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.