Oklahoma Well Data › Roger Mills County › Durham (73642)
Durham, OK (73642): well depth, water level & drilling cost
✓ 212 OWRB records · Roger Mills County
Pull every recorded well near a Durham (73642) address — $49
How deep are wells in and around Durham (73642), Oklahoma?
The median drilled well depth in and around Durham (73642) is 132 ft, based on 204 wells with recorded depths in the state OWRB database. Half fall between 95 ft and 182 ft; 90% are shallower than 240 ft.
How much does it cost to drill a well in and around Durham (73642)?
Applying published per-foot rates to the local median depth of 132 ft: drilling and casing alone typically runs $3,300–$8,580; a complete system including pump, pressure tank, and hookup typically runs $7,920–$13,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Durham (73642)?
The median static water level is 60 ft below ground surface (middle half of wells: 30 ft–94 ft), from 186 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Roger Mills County.
Part of Roger Mills County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.