⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Garfield County › Enid (73701)

Enid, OK (73701): well depth, water level & drilling cost

✓ 405 OWRB records · Garfield County

46 ftmedian well depth
40 ft–54 fttypical depth range
28 ftmedian static water level
20 gpmmedian yield (361 tests)

Pull every recorded well near a Enid (73701) address — $49

How deep are wells in and around Enid (73701), Oklahoma?

The median drilled well depth in and around Enid (73701) is 46 ft, based on 382 wells with recorded depths in the state OWRB database. Half fall between 40 ft and 54 ft; 90% are shallower than 60 ft.

How much does it cost to drill a well in and around Enid (73701)?

Applying published per-foot rates to the local median depth of 46 ft: drilling and casing alone typically runs $1,150–$2,990; a complete system including pump, pressure tank, and hookup typically runs $2,760–$4,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Enid (73701)?

The median static water level is 28 ft below ground surface (middle half of wells: 22 ft–34 ft), from 348 measurements.

Drilled depth distribution

0–50 ft 241 50–100 ft 135 100–150 ft 0 150–200 ft 0 200–300 ft 5 300–400 ft 0 400–600 ft 0 600+ ft 1
Looking at a specific property in Enid (73701)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Enid (73701)

Free. Goes to licensed drillers working Garfield County.

Part of Garfield County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.