⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Alfalfa County › Cherokee (73728)

Cherokee, OK (73728): well depth, water level & drilling cost

✓ 325 OWRB records · Alfalfa County

45 ftmedian well depth
40 ft–60 fttypical depth range
18 ftmedian static water level
20 gpmmedian yield (299 tests)

Pull every recorded well near a Cherokee (73728) address — $49

How deep are wells in and around Cherokee (73728), Oklahoma?

The median drilled well depth in and around Cherokee (73728) is 45 ft, based on 319 wells with recorded depths in the state OWRB database. Half fall between 40 ft and 60 ft; 90% are shallower than 90 ft.

How much does it cost to drill a well in and around Cherokee (73728)?

Applying published per-foot rates to the local median depth of 45 ft: drilling and casing alone typically runs $1,125–$2,925; a complete system including pump, pressure tank, and hookup typically runs $2,700–$4,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cherokee (73728)?

The median static water level is 18 ft below ground surface (middle half of wells: 13 ft–25 ft), from 267 measurements.

Drilled depth distribution

0–50 ft 180 50–100 ft 115 100–150 ft 19 150–200 ft 2 200–300 ft 2 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Cherokee (73728)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cherokee (73728)

Free. Goes to licensed drillers working Alfalfa County.

Part of Alfalfa County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.