Oklahoma Well Data › Ellis County › Arnett (73832)
Arnett, OK (73832): well depth, water level & drilling cost
✓ 438 OWRB records · Ellis County
Pull every recorded well near a Arnett (73832) address — $49
How deep are wells in and around Arnett (73832), Oklahoma?
The median drilled well depth in and around Arnett (73832) is 200 ft, based on 432 wells with recorded depths in the state OWRB database. Half fall between 130 ft and 284 ft; 90% are shallower than 370 ft.
How much does it cost to drill a well in and around Arnett (73832)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Arnett (73832)?
The median static water level is 100 ft below ground surface (middle half of wells: 60 ft–153 ft), from 329 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Ellis County.
Part of Ellis County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.