⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Pawnee County › Terlton (74081)

Terlton, OK (74081): well depth, water level & drilling cost

✓ 214 OWRB records · Pawnee County

196 ftmedian well depth
134 ft–240 fttypical depth range
110 ftmedian static water level
14 gpmmedian yield (208 tests)

Pull every recorded well near a Terlton (74081) address — $49

How deep are wells in and around Terlton (74081), Oklahoma?

The median drilled well depth in and around Terlton (74081) is 196 ft, based on 212 wells with recorded depths in the state OWRB database. Half fall between 134 ft and 240 ft; 90% are shallower than 284 ft.

How much does it cost to drill a well in and around Terlton (74081)?

Applying published per-foot rates to the local median depth of 196 ft: drilling and casing alone typically runs $4,900–$12,740; a complete system including pump, pressure tank, and hookup typically runs $11,760–$19,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Terlton (74081)?

The median static water level is 110 ft below ground surface (middle half of wells: 47 ft–160 ft), from 201 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 27 100–150 ft 34 150–200 ft 45 200–300 ft 86 300–400 ft 17 400–600 ft 1 600+ ft 0
Looking at a specific property in Terlton (74081)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Terlton (74081)

Free. Goes to licensed drillers working Pawnee County.

Part of Pawnee County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.