⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Haskell County › Hoyt (74440)

Hoyt, OK (74440): well depth, water level & drilling cost

✓ 95 OWRB records · Haskell County

155 ftmedian well depth
110 ft–200 fttypical depth range
33 ftmedian static water level
4 gpmmedian yield (90 tests)

Pull every recorded well near a Hoyt (74440) address — $49

How deep are wells in and around Hoyt (74440), Oklahoma?

The median drilled well depth in and around Hoyt (74440) is 155 ft, based on 93 wells with recorded depths in the state OWRB database. Half fall between 110 ft and 200 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Hoyt (74440)?

Applying published per-foot rates to the local median depth of 155 ft: drilling and casing alone typically runs $3,875–$10,075; a complete system including pump, pressure tank, and hookup typically runs $9,300–$15,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hoyt (74440)?

The median static water level is 33 ft below ground surface (middle half of wells: 20 ft–101 ft), from 91 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 12 100–150 ft 24 150–200 ft 27 200–300 ft 23 300–400 ft 6 400–600 ft 0 600+ ft 1
Looking at a specific property in Hoyt (74440)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hoyt (74440)

Free. Goes to licensed drillers working Haskell County.

Part of Haskell County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.