⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Wagoner County › Taft (74463)

Taft, OK (74463): well depth, water level & drilling cost

✓ 62 OWRB records · Wagoner County

37 ftmedian well depth
34 ft–65 fttypical depth range
16 ftmedian static water level
122 gpmmedian yield (57 tests)

Pull every recorded well near a Taft (74463) address — $49

How deep are wells in and around Taft (74463), Oklahoma?

The median drilled well depth in and around Taft (74463) is 37 ft, based on 61 wells with recorded depths in the state OWRB database. Half fall between 34 ft and 65 ft; 90% are shallower than 225 ft.

How much does it cost to drill a well in and around Taft (74463)?

Applying published per-foot rates to the local median depth of 37 ft: drilling and casing alone typically runs $925–$2,405; a complete system including pump, pressure tank, and hookup typically runs $2,220–$3,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Taft (74463)?

The median static water level is 16 ft below ground surface (middle half of wells: 14 ft–25 ft), from 52 measurements.

Drilled depth distribution

0–50 ft 40 50–100 ft 8 100–150 ft 3 150–200 ft 2 200–300 ft 6 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Taft (74463)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Taft (74463)

Free. Goes to licensed drillers working Wagoner County.

Part of Wagoner County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.