⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Kay County › Marland (74644)

Marland, OK (74644): well depth, water level & drilling cost

✓ 100 OWRB records · Kay County

49 ftmedian well depth
39 ft–54 fttypical depth range
17 ftmedian static water level
50 gpmmedian yield (93 tests)

Pull every recorded well near a Marland (74644) address — $49

How deep are wells in and around Marland (74644), Oklahoma?

The median drilled well depth in and around Marland (74644) is 49 ft, based on 96 wells with recorded depths in the state OWRB database. Half fall between 39 ft and 54 ft; 90% are shallower than 66 ft.

How much does it cost to drill a well in and around Marland (74644)?

Applying published per-foot rates to the local median depth of 49 ft: drilling and casing alone typically runs $1,225–$3,185; a complete system including pump, pressure tank, and hookup typically runs $2,940–$4,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Marland (74644)?

The median static water level is 17 ft below ground surface (middle half of wells: 15 ft–23 ft), from 84 measurements.

Drilled depth distribution

0–50 ft 48 50–100 ft 43 100–150 ft 3 150–200 ft 1 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Marland (74644)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Marland (74644)

Free. Goes to licensed drillers working Kay County.

Part of Kay County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.