Oklahoma Well Data › Mccurtain County › Wright City (74766)
Wright City, OK (74766): well depth, water level & drilling cost
✓ 53 OWRB records · Mccurtain County
Pull every recorded well near a Wright City (74766) address — $49
How deep are wells in and around Wright City (74766), Oklahoma?
The median drilled well depth in and around Wright City (74766) is 165 ft, based on 53 wells with recorded depths in the state OWRB database. Half fall between 102 ft and 301 ft; 90% are shallower than 305 ft.
How much does it cost to drill a well in and around Wright City (74766)?
Applying published per-foot rates to the local median depth of 165 ft: drilling and casing alone typically runs $4,125–$10,725; a complete system including pump, pressure tank, and hookup typically runs $9,900–$16,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Wright City (74766)?
The median static water level is 34 ft below ground surface (middle half of wells: 20 ft–96 ft), from 42 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mccurtain County.
Part of Mccurtain County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.