⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Seminole County › Konawa (74849)

Konawa, OK (74849): well depth, water level & drilling cost

✓ 367 OWRB records · Seminole County

200 ftmedian well depth
140 ft–260 fttypical depth range
72 ftmedian static water level
15 gpmmedian yield (341 tests)

Pull every recorded well near a Konawa (74849) address — $49

How deep are wells in and around Konawa (74849), Oklahoma?

The median drilled well depth in and around Konawa (74849) is 200 ft, based on 364 wells with recorded depths in the state OWRB database. Half fall between 140 ft and 260 ft; 90% are shallower than 330 ft.

How much does it cost to drill a well in and around Konawa (74849)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Konawa (74849)?

The median static water level is 72 ft below ground surface (middle half of wells: 30 ft–125 ft), from 229 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 33 100–150 ft 58 150–200 ft 64 200–300 ft 132 300–400 ft 56 400–600 ft 10 600+ ft 2
Looking at a specific property in Konawa (74849)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Konawa (74849)

Free. Goes to licensed drillers working Seminole County.

Part of Seminole County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.