Oklahoma Well Data › Hughes County › Lamar (74850)
Lamar, OK (74850): well depth, water level & drilling cost
✓ 69 OWRB records · Hughes County
Pull every recorded well near a Lamar (74850) address — $49
How deep are wells in and around Lamar (74850), Oklahoma?
The median drilled well depth in and around Lamar (74850) is 200 ft, based on 65 wells with recorded depths in the state OWRB database. Half fall between 112 ft and 220 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in and around Lamar (74850)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Lamar (74850)?
The median static water level is 107 ft below ground surface (middle half of wells: 48 ft–143 ft), from 44 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hughes County.
Part of Hughes County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.