Oklahoma Well Data › Okfuskee County › Okemah (74859)
Okemah, OK (74859): well depth, water level & drilling cost
✓ 72 OWRB records · Okfuskee County
Pull every recorded well near a Okemah (74859) address — $49
How deep are wells in and around Okemah (74859), Oklahoma?
The median drilled well depth in and around Okemah (74859) is 190 ft, based on 67 wells with recorded depths in the state OWRB database. Half fall between 140 ft and 257 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in and around Okemah (74859)?
Applying published per-foot rates to the local median depth of 190 ft: drilling and casing alone typically runs $4,750–$12,350; a complete system including pump, pressure tank, and hookup typically runs $11,400–$19,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Okemah (74859)?
The median static water level is 80 ft below ground surface (middle half of wells: 40 ft–130 ft), from 49 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Okfuskee County.
Part of Okfuskee County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.