Oklahoma Well Data › Sequoyah County › Marble City (74945)
Marble City, OK (74945): well depth, water level & drilling cost
✓ 72 OWRB records · Sequoyah County
Pull every recorded well near a Marble City (74945) address — $49
How deep are wells in and around Marble City (74945), Oklahoma?
The median drilled well depth in and around Marble City (74945) is 263 ft, based on 72 wells with recorded depths in the state OWRB database. Half fall between 145 ft and 415 ft; 90% are shallower than 500 ft.
How much does it cost to drill a well in and around Marble City (74945)?
Applying published per-foot rates to the local median depth of 263 ft: drilling and casing alone typically runs $6,575–$17,095; a complete system including pump, pressure tank, and hookup typically runs $15,780–$26,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Marble City (74945)?
The median static water level is 57 ft below ground surface (middle half of wells: 32 ft–121 ft), from 40 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Sequoyah County.
Part of Sequoyah County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.