Oklahoma Well Data › Mccurtain County › Watson (74963)
Watson, OK (74963): well depth, water level & drilling cost
✓ 160 OWRB records · Mccurtain County
Pull every recorded well near a Watson (74963) address — $49
How deep are wells in and around Watson (74963), Oklahoma?
The median drilled well depth in and around Watson (74963) is 126 ft, based on 160 wells with recorded depths in the state OWRB database. Half fall between 102 ft and 186 ft; 90% are shallower than 225 ft.
How much does it cost to drill a well in and around Watson (74963)?
Applying published per-foot rates to the local median depth of 126 ft: drilling and casing alone typically runs $3,150–$8,190; a complete system including pump, pressure tank, and hookup typically runs $7,560–$12,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Watson (74963)?
The median static water level is 50 ft below ground surface (middle half of wells: 32 ft–84 ft), from 150 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mccurtain County.
Part of Mccurtain County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.