Oklahoma Well Data › Creek County
Creek County, Oklahoma: well depth, water level & drilling cost
✓ 2,833 OWRB records · verified 2026-10-02
Pull every recorded well near a Creek County address — $49
How deep are wells in Creek County, Oklahoma?
The median drilled well depth in Creek County is 165 ft, based on 2,766 wells with recorded depths in the state OWRB database. Half of all wells fall between 120 ft and 230 ft; 90% are shallower than 280 ft. Wells drilled since 2016 have a median depth of 160 ft.
How much does it cost to drill a well in Creek County?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Creek County?
The median static water level is 77 ft below ground surface (middle half of wells: 40 ft–130 ft), from 2,420 measurements.
How much water do wells in Creek County produce?
The median tested yield is 15 gpm (middle half: 9 gpm–20 gpm), from 2,610 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Creek County.
Well records by ZIP code in Creek County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Bristow (74010) — 566 wells, median 160 ft
- Mannford (74044) — 486 wells, median 180 ft
- Depew (74028) — 337 wells, median 148 ft
- Shamrock (74068) — 268 wells, median 168 ft
- Drumright (74030) — 265 wells, median 154 ft
- Slick (74071) — 190 wells, median 180 ft
- Kellyville (74039) — 177 wells, median 240 ft
- Oilton (74052) — 170 wells, median 157 ft
- Milfay (74046) — 145 wells, median 160 ft
- Sapulpa (74066) — 120 wells, median 210 ft
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.