Oklahoma Well Data › Creek County › Slick (74071)
Slick, OK (74071): well depth, water level & drilling cost
✓ 190 OWRB records · Creek County
Pull every recorded well near a Slick (74071) address — $49
How deep are wells in and around Slick (74071), Oklahoma?
The median drilled well depth in and around Slick (74071) is 180 ft, based on 183 wells with recorded depths in the state OWRB database. Half fall between 120 ft and 260 ft; 90% are shallower than 340 ft.
How much does it cost to drill a well in and around Slick (74071)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Slick (74071)?
The median static water level is 56 ft below ground surface (middle half of wells: 35 ft–93 ft), from 150 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Creek County.
Part of Creek County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.