⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Osage County

Osage County, Oklahoma: well depth, water level & drilling cost

✓ 1,148 OWRB records · verified 2026-10-02

140 ftmedian well depth
76 ft–220 fttypical depth range
60 ftmedian static water level
10 gpmmedian yield (974 tests)

Pull every recorded well near a Osage County address — $49

How deep are wells in Osage County, Oklahoma?

The median drilled well depth in Osage County is 140 ft, based on 1,099 wells with recorded depths in the state OWRB database. Half of all wells fall between 76 ft and 220 ft; 90% are shallower than 300 ft. Wells drilled since 2016 have a median depth of 180 ft.

How much does it cost to drill a well in Osage County?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Osage County?

The median static water level is 60 ft below ground surface (middle half of wells: 28 ft–120 ft), from 882 measurements.

How much water do wells in Osage County produce?

The median tested yield is 10 gpm (middle half: 5 gpm–26 gpm), from 974 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 140 50–100 ft 233 100–150 ft 203 150–200 ft 163 200–300 ft 244 300–400 ft 98 400–600 ft 12 600+ ft 6
Looking at a specific property in Osage County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Osage County

Free. Goes to licensed drillers working Osage County.

Well records by ZIP code in Osage County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.