⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Osage County › Prue (74060)

Prue, OK (74060): well depth, water level & drilling cost

✓ 197 OWRB records · Osage County

180 ftmedian well depth
140 ft–240 fttypical depth range
95 ftmedian static water level
12 gpmmedian yield (177 tests)

Pull every recorded well near a Prue (74060) address — $49

How deep are wells in and around Prue (74060), Oklahoma?

The median drilled well depth in and around Prue (74060) is 180 ft, based on 190 wells with recorded depths in the state OWRB database. Half fall between 140 ft and 240 ft; 90% are shallower than 301 ft.

How much does it cost to drill a well in and around Prue (74060)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Prue (74060)?

The median static water level is 95 ft below ground surface (middle half of wells: 60 ft–140 ft), from 168 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 17 100–150 ft 31 150–200 ft 65 200–300 ft 44 300–400 ft 23 400–600 ft 2 600+ ft 1
Looking at a specific property in Prue (74060)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Prue (74060)

Free. Goes to licensed drillers working Osage County.

Part of Osage County well records.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.