⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Payne County

Payne County, Oklahoma: well depth, water level & drilling cost

✓ 2,420 OWRB records · verified 2026-10-02

140 ftmedian well depth
105 ft–190 fttypical depth range
60 ftmedian static water level
11 gpmmedian yield (2,250 tests)

Pull every recorded well near a Payne County address — $49

How deep are wells in Payne County, Oklahoma?

The median drilled well depth in Payne County is 140 ft, based on 2,347 wells with recorded depths in the state OWRB database. Half of all wells fall between 105 ft and 190 ft; 90% are shallower than 229 ft. Wells drilled since 2016 have a median depth of 160 ft.

How much does it cost to drill a well in Payne County?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Payne County?

The median static water level is 60 ft below ground surface (middle half of wells: 35 ft–100 ft), from 2,023 measurements.

How much water do wells in Payne County produce?

The median tested yield is 11 gpm (middle half: 7 gpm–18 gpm), from 2,250 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 126 50–100 ft 310 100–150 ft 794 150–200 ft 607 200–300 ft 447 300–400 ft 31 400–600 ft 13 600+ ft 19
Looking at a specific property in Payne County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Payne County

Free. Goes to licensed drillers working Payne County.

Well records by ZIP code in Payne County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.