Oklahoma Well Data › Payne County › Ripley (74062)
Ripley, OK (74062): well depth, water level & drilling cost
✓ 339 OWRB records · Payne County
Pull every recorded well near a Ripley (74062) address — $49
How deep are wells in and around Ripley (74062), Oklahoma?
The median drilled well depth in and around Ripley (74062) is 121 ft, based on 330 wells with recorded depths in the state OWRB database. Half fall between 80 ft and 168 ft; 90% are shallower than 200 ft.
How much does it cost to drill a well in and around Ripley (74062)?
Applying published per-foot rates to the local median depth of 121 ft: drilling and casing alone typically runs $3,025–$7,865; a complete system including pump, pressure tank, and hookup typically runs $7,260–$12,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Ripley (74062)?
The median static water level is 48 ft below ground surface (middle half of wells: 25 ft–78 ft), from 291 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Payne County.
Part of Payne County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.