⟁ Oklahoma Well Data field records · 2026 survey

Oklahoma Well Data › Tulsa County

Tulsa County, Oklahoma: well depth, water level & drilling cost

✓ 1,091 OWRB records · verified 2026-10-02

48 ftmedian well depth
33 ft–101 fttypical depth range
25 ftmedian static water level
25 gpmmedian yield (903 tests)

Pull every recorded well near a Tulsa County address — $49

How deep are wells in Tulsa County, Oklahoma?

The median drilled well depth in Tulsa County is 48 ft, based on 1,019 wells with recorded depths in the state OWRB database. Half of all wells fall between 33 ft and 101 ft; 90% are shallower than 200 ft. Wells drilled since 2016 have a median depth of 45 ft.

How much does it cost to drill a well in Tulsa County?

Applying published per-foot rates to the local median depth of 45 ft: drilling and casing alone typically runs $1,125–$2,925; a complete system including pump, pressure tank, and hookup typically runs $2,700–$4,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Tulsa County?

The median static water level is 25 ft below ground surface (middle half of wells: 16 ft–55 ft), from 883 measurements.

How much water do wells in Tulsa County produce?

The median tested yield is 25 gpm (middle half: 10 gpm–50 gpm), from 903 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 518 50–100 ft 222 100–150 ft 141 150–200 ft 35 200–300 ft 77 300–400 ft 18 400–600 ft 8 600+ ft 0
Looking at a specific property in Tulsa County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Tulsa County

Free. Goes to licensed drillers working Tulsa County.

Well records by ZIP code in Tulsa County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.