Oklahoma Well Data › Tulsa County › Sand Springs (74063)
Sand Springs, OK (74063): well depth, water level & drilling cost
✓ 148 OWRB records · Tulsa County
Pull every recorded well near a Sand Springs (74063) address — $49
How deep are wells in and around Sand Springs (74063), Oklahoma?
The median drilled well depth in and around Sand Springs (74063) is 119 ft, based on 146 wells with recorded depths in the state OWRB database. Half fall between 45 ft and 225 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in and around Sand Springs (74063)?
Applying published per-foot rates to the local median depth of 119 ft: drilling and casing alone typically runs $2,975–$7,735; a complete system including pump, pressure tank, and hookup typically runs $7,140–$11,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Sand Springs (74063)?
The median static water level is 60 ft below ground surface (middle half of wells: 25 ft–130 ft), from 117 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Tulsa County.
Part of Tulsa County well records.
Method: medians computed from OWRB records (OWRB reported well logs, water wells only (water-quality, monitoring, site-assessment and heat-exchange holes excluded); depths 0-5,000 ft. Water-level figures are OWRB's reported depth to first water), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.